|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
04-11-2005, 11:04 PM
|
#1 | ||
|
Regular Member
Join Date: Sep 2005
Location: Melbourne
Posts: 125
|
I've had the car about 6 weeks now and and now starting to tinker around a little bit.
The handbrake shoe was sticking to the disc a bit on the right rear and making that horrible squealing sound. I printed out the instructions on how to adjust the handbrake but came up with the following problem: The inspection hole on the disc doesn't line up with the inspection hole on the hub so you can't adjust the handbrake without taking the disc off. The problem with that is you either don't adjust it enough and it brake doesn't hold or you over tighten it and you can't get the disc back on. Sitting here thinking about it, is it possible the guy that had the car before me put the discs on *** about ie. left on the right and right on the left? The hole for the securing screw lines up but not for the inspection hole that has the rubber grommet. Cheers Matt |
||
|
|
Brake disc question
Threaded Mode